Chainsaw 101: A Detailed Guide, How to Use, Mistake to Avoid, Buying Guide

Chainsaws are a tool that can be used for a number of different jobs, from cutting down small trees to removing tree stumps. 

In order to make sure you get the most use out of your chainsaw, it’s important to understand how to properly operate one as well as what supplies and techniques might serve you best in certain situations. 

With the right knowledge and enough practice, using a chainsaw can be a simple way to cut down on time-consuming tasks that require manual labor.

Before going any further into this guide, please remember that operating a chainsaw is both dangerous and strenuous work. It is not recommended for those under eighteen years of age or people who suffer from conditions such as high blood pressure or heart problems without consulting.

Chainsaws come in both electric and gas-powered varieties, with the latter often being more powerful. Whichever type you choose, it’s important to read the manufacturer’s instructions carefully and follow all safety precautions. 

In addition, be sure to wear the appropriate safety gear while using a chainsaw, including goggles, a hard hat, hearing protection, and sturdy boots.

When using a chainsaw, always cut with the saw blade moving away from you. Start by making a small notch in the tree trunk to gauge how much room you’ll need to make the full cut. 

Next, hold the chainsaw with both hands and ensure that the guide bar is parallel to the ground. Apply pressure to the rear handle and slowly pull the chainsaw toward you, maintaining contact with the tree trunk. 

When the chainsaw blade meets the notch, allow it to fully penetrate the wood before applying more pressure to the rear handle and completing the cut.

Chainsaw 101 A Detailed Guide

If branches or limbs are in your way while cutting down a tree, always cut them off first. To do this, hold the chainsaw with one hand and place the other hand on top of the branch you want to cut. 

Squeeze the trigger and saw through the branch until it’s completely severed. Be careful not to let the chainsaw kickback while doing this. 

Removing a tree stump can be a difficult task, but with a chainsaw, it can be done relatively easily. Start by digging out as much of the stump as possible with a shovel. 

Once you’ve removed as much of the stump as you can, cut away any remaining protruding roots using the chainsaw. 

Next, use an ax or hatchet to chip away at the top of the stump until it’s level with the ground. Finally, use a weed eater or lawnmower to tidy up the area around the stump.

The key to using a chainsaw effectively is practice, practice, practice! The more comfortable you are with your saw, the easier all of your tasks will be. So get out there and start sawing!

Types of Chainsaws

There are many types of chainsaws to choose from, depending on your needs. Electric chainsaws are a good choice for smaller jobs, while gas-powered chainsaws are better for larger projects. 

There are also professional and DIY chainsaws available, so you can find the perfect one for your needs. Chainsaws come in a variety of sizes, so you can find the perfect one for any job. 

Whether you’re a professional contractor or just need to do some light pruning, there is a chainsaw that’s perfect for you. Be sure to research your options and find the best one for your needs!

Chain saws are incredibly popular tools, especially in wooded areas where trees need regular pruning and cutting. 

Types of Chainsaws

If you want to cut down a tree or limb that has fallen on your property or simply trim some of the branches off of a few existing ones, then owning one (or more) chain saws could be vital. 

There are five different types of chain saws to choose from battery-powered chainsaws, electric chainsaws, hand-pulled chainsaws, gas-powered chainsaws, and cordless chainsaws. 

Each type is different and offers its own unique advantages and disadvantages.

  • Battery-powered chainsaws are also known as cordless chainsaws since they have to be plugged first into an electrical current before turning on. 

They’re rechargeable, so you will probably need to purchase a separate charging unit if it doesn’t come with one already built-in. 

These types of chainsaws are best for people who live in the suburbs or the city because there usually aren’t many outlets where trees are located that need pruning or cutting. 

Cordless models must be within range of an outlet at all times but can usually work for hours without needing to be plugged back up again. Another benefit is that these saws don’t require any additional maintenance, either.

  • Electric chainsaws are smaller, lighter, and usually cheaper than gasoline-powered saws. They are great for homeowners who aren’t looking to use their chainsaws often or want a lighter, more manageable saw by which to cut down branches. 

Electric models can usually handle mid-sized tasks around the yard such as cutting up firewood and pruning branches, but they may not be strong enough for bigger jobs like felling trees, according to The Spruce. 

— Also read: Do Electric Chainsaws Overheat? Common Causes & Solution

Since electric chainsaws don’t require gas, there is very little upkeep needed with them; however, you will need an electrical outlet within range of where you plan on using your chainsaw in order for it to work properly.

  • Hand-pulled chainsaws are used most often by people who do not have electricity included in their homes or need a chainsaw while they’re on the go. 

They are also great for people who want a very lightweight chainsaw as they only weigh around 5 pounds. 

The trade-off is that hand-pulled chainsaws have the least amount of power and can only be used for lighter tasks, such as removing small branches or pruning trees. 

Because there are no gas or oil changes needed with this type of saw, it doesn’t require much maintenance either.

  • Gas-powered chainsaws are the most powerful type of chainsaw and can handle the heaviest of jobs. However, they are also the heaviest and least maneuverable so they may not be ideal for everyone. 

These types of saws also require more tune-ups and maintenance than electric and cordless chainsaws.

Cordless chainsaws, or battery-powered models, are great for people who want a saw that offers the power of a gas-powered one but don’t want to deal with the problems that come along with it. 

These types of saws typically offer more runtime than electric ones since their batteries recharged rather quickly. However, they still require some amount of maintenance and may not be strong enough to handle bigger tasks around your property. 

Their lightweight design makes them ideal for both pruning and cutting down branches, but they will need to be recharged before every use. 

Once you find out which type is best suited for your needs, make sure the model you choose has everything else needed for it to work, such as the correct chain size and chain oil. 

Buying the wrong chainsaw for the job you need it to do can be not only frustrating but dangerous as well. 

Each type of chainsaw has its own unique set of benefits and drawbacks that you should consider before making your purchase. 

Battery-powered chainsaws are perfect for people who live in suburban or urban areas with limited access to outlets; electric chainsaws are great for homeowners who want a lightweight saw for smaller jobs; hand-pulled chainsaws are good for people looking for a very lightweight option; gas-powered chainsaws are great for people who need a powerful saw for bigger projects, and cordless chainsaws offer the best of both worlds with their power and lightweight design. 

No matter which type you choose, make sure to select a saw that does the best job of tackling the jobs you need it to do in order to get the most use out of it.

How to use a Chainsaw?

Chainsaws are a great tool for cutting through wood. If you have a lot of logs to cut up for firewood, you’ll definitely want one.

While chainsaws can be complicated machines, using them isn’t too difficult! In this article we’re going to show you how to use a chainsaw in ten easy steps:

1. Carry the chainsaw! Chainsaws are heavy tools and can strain your back if you don’t lift them properly. The best way is to get a friend who’s just as strong as you – or stronger – and have them carry it while you walk behind. 

You can also hang it from a shoulder strap or carrying handle on top of the saw itself. Make sure the entire weight of the saw is resting on your shoulder, not just your arm.

How to use a Chainsaw

2. Check the chain for tension. The chain should be tight, but not so tight that it’s difficult to turn the bar. If it’s too loose, the chain will come off; if it’s too tight, you’ll have trouble starting the saw. 

To adjust the chain tension, loosen the screws on the side of the chainsaw until you can move the chain by hand, then retighten them.

3. Start the saw with your left hand. Place your left hand on top of the bar and your right hand on the throttle. Squeeze the throttle with your right hand and pull back on the starter handle with your left. 

You should feel a strong vibration when the saw is running.

4. Keep the saw close to your body. Once you’ve started it, hold the chainsaw so that its bar is just touching your leg or knee – this way, if the chain catches on something and jumps back towards you, it won’t go flying very far. 

5. Cut slowly and steadily! Chainsaws operate by spinning a sharpened metal bar at high speeds – keep in mind that they can do serious damage to anything they hit if they come loose from their intended path! Make sure you’re cutting in a straight line towards what you want to cut down. 

6. Don’t put any part of your body above where you want to cut! For example: If there’s a branch that you want to cut off a tree, make sure you’re not standing directly below it. If the branch falls while you’re cutting it, it could easily land on your head and kill you. 

7. Finish your cut before releasing the throttle. If you let go of the throttle before your cut is finished, the saw will stop abruptly and could throw you off balance. 

8. Don’t force the saw if it’s having trouble cutting through something. More often than not, this means that the chain is too tight and you need to loosen it up. You can also try using a different part of the chainsaw to cut with or switch to a handsaw if necessary.

9. Clean the chainsaw thoroughly after use. You should make sure that the saw and the bar are free of any wood chips and sawdust, as these can build up inside and affect how well it runs.

10. Store your chainsaw in a place where other people won’t stumble across it by accident. If you leave it out where someone might trip over or knock into it, they could injure themselves very badly! Chainsaws aren’t toys – keep them locked away until they’re needed again. 

Buying Guide for the best type of Chainsaw for you

There are two main types of chainsaws you can purchase: gas-powered and electric. There’s also an option to choose a battery-powered saw, but that option is less common in today’s market. 

Gas-powered ones have been around for longer, so they’ve had more time to advance. They’re generally more powerful than their electric counterparts.

The best type to get depends on your needs and preferences in a saw. If you only want to occasionally cut firewood or limbs off trees around your property, an electric one may be enough for you. 

However, if you do a lot of work with wood regularly, you should consider investing in a gas chainsaw since it will provide more power and last longer.

What to look for in a chainsaw

When you’re shopping for a chainsaw, there are some important factors you need to consider. The power of the saw is important – you don’t want something too weak or it will take forever to get the job done, but you also don’t want something so powerful that it’s hard to control.

Another thing to think about is the chain size. The chain size refers to the width of the blade, so you’ll want to get one that’s appropriate for the task at hand. For example, if you’re only going to be cutting small branches, you don’t need a chainsaw with a monstrous chain size. 

 weight of the saw is also worth considering. You don’t want something that’s too heavy to handle, but you also don’t want something so light it feels flimsy.

The price of the chainsaw is another thing to think about. Like anything, you get what you pay for – a more expensive chainsaw will likely have more features and be of better quality than a cheaper one.

chainsaw blade

If you’re still unsure about which type of chainsaw to buy, talk to an expert at your local hardware store. They’ll be able to help you choose the best one for your needs and budget.

— Also read: Average Electric Chainsaw Cost? (With 3 Most Affordable Options)

When it comes time to buy a chainsaw, there are many different factors you need to take into account. The two main types of saws are gas-powered and electric. If you’re looking for a saw that has more power, then a gas or battery-powered model may be best. 

You’ll also want to buy a chainsaw that’s the right size for your cutting needs; if you require something to cut down trees, you don’t need something designed for light-duty use.

The weight of the saw is equally important; you don’t want something too heavy or it will be difficult to handle, but you also don’t want something so light that it feels flimsy. 

The price should factor into your decision as well; an expensive chainsaw should provide more features and better quality than one on the lower end of the price scale. When shopping around, consider talking to someone at your local hardware store to get more advice. 

Whichever chainsaw you choose, make sure to read the instruction manual carefully and practice using it in a safe environment before attempting to use it on a real project. 

With the right tool for the job, chainsawing can be a quick and easy task – so long as you’re using the right saw for the job at hand.

Safety Tips When Using a Chainsaw

One of the most difficult things to do is to cut down a tree. There are so many steps that have to be taken, and one thing you have to be very careful of is using a chainsaw. This power tool can cut through wood better than any saw. 

However, just like any other power tool out there, this item has its own set of safety precautions that must be followed in order to use it efficiently.

Here are just a few tips on how you can safely handle a chainsaw:

1- The first thing you should do when getting ready to use your chainsaw is made sure that the chain brake is activated. If the bar and the engine are both moving at once, someone could get seriously injured or killed.

2- Make sure you are aware of your surroundings. Don’t cut down a tree if there is someone walking behind you or if there are any bystanders in the area. You don’t want to lose control of the chainsaw and have it go flying in another direction.

3- Always make sure that the chain saw is properly sharpened before using it. Dull blades can easily cause injuries.

4- Wear gloves when handling the chainsaw, and make sure you are wearing proper eye protection and earplugs as well. The noise level from a chainsaw can be very loud, and if you’re not careful, you could damage your hearing.

5- Be extra careful when cutting branches are near power lines. contact with a power line can be deadly.

6- Wear sturdy shoes and clothing that won’t get caught in the chainsaw.

7- Make sure to read all of the instructions very carefully before attempting to use a chainsaw. If you’re not familiar with how it works, ask someone who is experienced in operating one to show you the proper steps.

8- Don’t do any cutting above your head or while standing on a ladder because these areas are not safe places for doing so.

9- When possible, always cut down trees at their base, taking care to make sure they don’t fall toward anyone else around them as well as yourself. There is usually more than enough room for the tree trunk to fall away from other people and objects.

10- Take a break every so often to cool down the engine. If you continue to run the chainsaw when it’s too hot, it can easily cause a fire.

Following these simple safety tips will help ensure that you can use your chainsaw safely and efficiently. 

Remember to always be aware of your surroundings and take your time while cutting down trees. And if you’re ever in doubt about how to safely operate a chainsaw, don’t hesitate to ask an expert for guidance. Stay safe!

Tips on Maintenance and Storage of a Chainsaw, Including How often it needs to be Sharpened

If you own a chainsaw, there are some steps that you can take to keep it in good shape for as long as possible. You’ll need to learn about the importance of sharpening the chain, how often you should do it, and what tools will be required to maintain your machine after each use.

The first thing you should know is that if you want your chainsaw to stay in top condition, then you must sharpen it regularly. Sharpening it between cuts keeps the edges from becoming dull or damaged while they are being used. 

A dull chain isn’t only hard on the machine — it’s also harder on wood when it cuts instead of slicing through effortlessly. It can cause serious damage to trees by doing more harm than good when you try to cut them. You may even end up having to replace the chain if it becomes too dull.

Sharpening a chainsaw is not a difficult task, but it’s one that should be done with caution. The most important thing is to make sure the chain is cold when you start to sharpen it. 

This can be done by letting the saw sit for at least 30 minutes after it has been used. In addition, you’ll need a sharpening stone, file, and lubricant.

The lubricant is used to help keep the chain cool while you’re sharpening it; otherwise, it can become quite hot and could potentially cause burns. 

There are several ways to sharpen a chainsaw chain. One popular method is to use a grinding wheel, which can be found at most hardware stores. 

However, if you’re not comfortable using this type of equipment, you can also take the chain to a professional sharpener.

No matter which method you choose, make sure that you are very careful when sharpening the chain. You don’t want to damage the teeth or make them too sharp, as this could also lead to problems when cutting wood. 

It’s also important to keep the chainsaw clean. This can be done by using a brush or cloth to remove any dirt or debris from the housing and chain. 

Be sure to pay special attention to the area around the chain and sprocket, as this is where most of the dirt and dust will accumulate.

If you take care of your chainsaw, it should last for many years. However, even the best-maintained machines will eventually need to be replaced. When that time comes, be sure to recycle the old saw in an environmentally friendly way. 

Chainsaws are amazing tools, but they require a bit of upkeep in order to stay in good condition. 

By learning about the importance of sharpening and how often it should be done, as well as how to clean and store the saw, you can keep your machine running like new for years to come. Happy cutting!

The most important thing when using a chainsaw is to always be aware of your surroundings and what is happening around you. Be especially cautious when sharpening the chain, as it can be easy to lose focus and cause an accident.

The best way to avoid any accidents while using a chainsaw is to always be prepared. That means wearing the proper safety gear, including gloves, goggles, and a hard hat. 

It’s also important to know how to use the saw correctly and to be aware of your surroundings. 

In addition, it’s crucial to keep the chainsaw in good condition. By taking care of the machine and sharpening the chain regularly, you can reduce the risk of accidents and keep the saw working properly. Stay safe out there!

Common Mistakes people make with their Chainsaws

One of the most useful tools in a lumberjack’s belt is its chainsaw. These powerful machines allow people to quickly cut through wood, which helps them get rid of felled trees faster.

However, one mistake that many new chainsaw users make is rushing to complete their projects.  It can be tempting to want to cut down as much wood as possible in one sitting, but this practice puts you at risk for carelessness and injury.

Another common problem with many chainsaws is that they are not maintained properly. Without proper maintenance, your saw may lack oil or have low chain tension (meaning it will not cut easily). 

Any number of these problems could lead to an accident if you act too quickly without taking care of these issues beforehand.

When it comes to maintaining your chainsaw, knowing the right way to do things is essential for protecting yourself and others around you.  A lack of oiling, for example, can cause your bars (the guide bar that runs along the top of your saw) to seize up with rust.  

Additionally, the tension on your chain might be too loose or too tight which can lead to injury if you try cutting through wood without fixing this problem first.  

It’s not difficult to maintain a quality saw if you know what exactly needs taking care of when, but one mistake could make all the difference between an easy project and an accident or injury.  

If you want to avoid mistakes, here are some tips on how to properly take care of your chainsaw:

  • Always check the chain tension and make sure it is tight before beginning any project. 
  • Make sure to oil your chainsaw regularly, as this will keep it running smoothly. 
  • Keep the bar free of built-up sawdust and debris, as this can cause the chain to bind up. 
  • Never force the saw through wood that is too difficult to cut – adjust the chain tension or find a different piece of wood to work with instead.

By following these simple tips, you can avoid many of the common mistakes people make when using chainsaws. By taking your time and being careful, you can complete your projects safely and without incident. 

Also read: Best Beginner Chainsaw Tips: How to Use Guide

Leave a Comment