If you’re a woodworker, then you know the importance of having a good air filtration system in your shop. Not only will it keep the air clean and healthy, but it will also help to protect your lungs from the sawdust and other debris that can be created when working with wood.
In this article, we’ll take a look at a few air filtration systems that you can put in your shop.
Here are the best air filtration system for woodshops:
- WEN 3410 Air Filtration System
- JET AFS-1000B Air Filtration System
- Powermatic PM1200 Air Filtration System
- POWERTEC AF4000 Air Filtration System
- Shop Fox W1830 Hanging Air Filter System
Best Woodshop Air Filtration System
First, let’s consider the basic types of air filtration systems for woodworking shops. Traditionally, there are three main types: standalone units, wall-mounted units, and ceiling-mounted units.
Each type has its particular benefits, so it is important to thoroughly understand what each offers before making a purchase.
The standalone unit is one of the most common types of air filtration systems used in woodworking shops today. They usually consist of a large, rectangular fan with filters at the front and back. The fan sucks in the dirty air and expels it cleanly out through the other side.
While these machines are very effective, they can be quite noisy. If you have a small shop, or if you are looking for a unit that will not disturb your work, then you may want to consider one of the wall-mounted or ceiling-mounted units.
Wall-mounted air filtration systems are becoming increasingly popular in woodworking shops. These units are designed to be mounted on the wall, out of the way of your work area. The advantage of these systems is that they tend to be much quieter than standalone units.
They also allow you to control the amount of airflow going into your shop, which can be very helpful when trying to dust off large pieces of equipment.
Ceiling-mounted air filtration systems offer many of the same benefits as wall-mounted units, but they are often larger in size. Because of this, it is important to make sure that your ceiling is high enough for the unit to work properly.
While these systems can be very effective at filtering the air, you need to keep in mind that there will be a limited amount of space for ductwork if you choose this option.
When deciding on an air filtration system for your shop, there are many other factors that you need to consider. Some things to think about include: airflow rate, filter type, and cost.
If possible, it is best to try out each type of system before making a decision so that you know exactly what kind works best for your particular situation.
If you’re looking for a high-quality air filtration system for your woodworking shop, then be sure to check out the range of units available online. You can find all the information that you need in order to make an informed decision about which system will work best for your needs.
At your fingertips is a great selection of air filtration systems, allowing you access to the right equipment that suits your preferences and budget. In no time at all, you’ll be enjoying clean, healthy air in your woodworking shop!
WEN 3410 Air Filtration System
|* Features three-speed settings * 1-micron filter and a 5-micron pre-filter * Noise rating – 50 to 60 dB * Air flow – 300/350/400 cubic feet per minute||Check On Amazon|
JET AFS-1000B Air Filtration System
|* Built-in timer with 2/4/8-hour settings * Two-Filter System with Air Diffuser * Disposable Electrostatic Outer Filter * 1,000 CFM Heavy-Duty * Noise Level – 62 dBA||Check On Amazon|
Powermatic PM1200 Air Filtration System
|* Nine hours of continuous operation * Automatic 200 hours filter change notification * 2-filter system traps particles upto 1 micron * 3 blower speeds||Check On Amazon|
POWERTEC AF4000 Air Filtration System
|* 3-Speed Air Filtration System * 300, 350 or 400 CFM * 3 timer setting with 1hr, 2hr, and 4hr options||Check On Amazon|
Shop Fox W1830 3-Speed Hanging Air Filteration System
|* 260, 362, and 409 CFM * Outer filter: 5 micron, Inner filter: 1 micron * Sound Rating 62, 67, 69 dB||Check On Amazon|
1. WEN 3410 Air Filtration System
WEN 3410 air filtration system is an excellent choice for people who want to keep their homes and family healthy.
It features three-speed settings, a 1-micron filter, and a 5-micron pre-filter, so you may choose the level of air filtration that best suits your needs.
It is a highly efficient and versatile air purification system used in homes and offices. There are three speeds on this air purifier: 300, 350, and 400 cubic feet/min.
It also has a remote control with three speeds, which gives the user more control over the filtration process.
You don’t have to think about putting off your machine with the timer function. Set the timer, and the device will shut down on its own when the timer expires, allowing you to clean your workshop after a day of carpentry without needing to be there.
It is a powerful air purifier and humidifier that can be controlled remotely from any room angle. With this technology, users may easily regulate their houses’ air quality and humidity levels.
It’s quite simple to set up: it simply requires connecting it to a standard socket. Simply attach four screw hooks (included) to the unit’s four-bolt hooks (included), and you’re good to go.
The two filters (a 5-micron pleated filter and a 1-micron pouch filter) were already in place and could be replaced in a matter of seconds.
Filters appear to be inexpensive to replace- I’ll check how long they last throughout this timespan of major house renovations and will update the review as needed.
It’s really simple to operate; simply push the power button numerous times to select the fan speed.
My main complaint is that you must use the remote to set a run time, even though there may be a way to do it directly on the device through some combination of buttons. The style of interface is basic and perhaps outdated, but I don’t find it a problem, tools have to be simple to operate.
PROs & CONs
- Filters that are simple to clean
- Remote control is included.
- Design that is light and portable
- Feature of time delay
- It can be hung from the ceiling
- Only the remote allows you to use the time delay option.
- Little loud compared to other air filtration systems
2. JET AFS-1000B Air Filtration System
The JET AFS-1000B Air Filtration System is an air purification system that uses an outer filter and an inner filter to remove dust, allergens, bacteria, and other particles from the air.
The air filtration system uses a two-stage filtering system to provide clean, fresh air. The outer filter captures 98 percent of 5-micron particles, while the interior filter captures 85 percent.
This filter will remove 99% of airborne particles and bacteria, including viruses and mould spores. It features an integrated timer with 2/4/8 hr settings and remote control. The system automatically shuts off after the timer runs out to save energy.
It is a portable air filtering system that may be mounted on a workbench or hung from the ceiling. It is protected from damage by rubber feet. The inside pocket filter may be easily removed for cleaning.
The three-speed (550, 702, and 1044 CFM) motor on the system allows you to select the most effective air purification for your workplace. It is lightweight and straightforward to operate.
It has simple-to-grip grips that make it easy to move the unit while in use. This system may be moved everywhere, from personal residences to businesses, schools, and even outdoor areas, thanks to its small size.
In medium settings, the blower pushes enough of a blast to move the shop vac hoses I have hanging on a peg ten feet away. That’s all you need: A blower with enough force to propel clean air into the business zone and keep dust suspended until it reaches your filter.
The noise is low enough that I can barely hear it on the high power setting when I’m upstairs. When they become clogged, the filter may be vacuumed off, and dust is sucked out of the air.
Because I don’t want to have to remember to turn it off later, I usually use a timer to turn it on before going outside,
PROs & CONs
- Constructed to last
- Cleaning is simple, easy to sue
- Filtration that is both powerful and efficient
- Rubber feet are included for added stability
- A bit pricey
- Not appropriate for a considerable store
3. Powermatic PM1200 Air Filtration System
The Powermatic PM1200 is an affordable and effective way to keep your home or office clean and safe from airborne contaminants. This device has a user-friendly design, making it easy to use and maintain.
It comes with remote control for easy operation. The unit removes hazardous particles from the air, such as pet dander, allergens, and other pollutants. For a more extensive range of effectiveness, it also uses radiofrequency.
It’s a powerful air filtering device with an adjustable timer. It can run consistently for up to nine hours and requires no installation tools. The system also has nine different timer settings that allow you to control the level of filtration to customize it for your needs.
It traps up to 99 percent of all five-micron pollutants and 85 percent of all one-micron particles for a better work environment. The equipment can be controlled from the cabinet or by a radio-frequency remote emitter, reducing the possibility of line-of-sight control.
After 200 hours, the machine’s lights will illuminate to remind the operator to change the filters. This helps avoid any possible health issues while also saving time on cleaning and maintenance.
Yes, I can run it nonstop while I’m out there. It has three settings. When doing general tasks, I’ll use low speed, but if I’m sanding, I’ll use high speed and then leave it on for an hour after closing up shop.
Because the fan is ceiling-mounted, and it’s heavy, so I used my tractor loader to lift it into place so I could clip the short support chains into the eye-bolts on the unit.
This Powermatic machine doesn’t appear to be of higher quality than any of the other less-expensive brands.
The package was quite secure and, upon opening, I discovered that the equipment had been well packed and protected. It’s simple to set up and use. It’s quiet, blows a lot of air, and the RF transmitter is fantastic!
PROs & CONs
- Timer, remote, and electronics all function as expected
- The air quality has significantly improved
- Quiet while in use
- Quality control is terrible
- Little bit expensive
4. POWERTEC AF4000 Air Filtration System
The POWERTEC AF4000 is an intelligent air filtration system that can be managed anywhere using a tablet or phone. It has 3-speed settings and filters the air automatically. Dust, smoke, pollen, and other particulates are removed from the atmosphere by the filters.
It is a solid and efficient air filtration system with three-speed settings of 300, 350, and 400 cubic feet per minute. Three-speed options, an inner or outer micron filter, and a mounting bracket are all included (no tools required).
The AF4000 is a remote-controlled air filtration device that incorporates cutting-edge technology. The 5-micron outer filter filters out larger dust and dirt, while the 1-micron inner filter collects the remainder, removing 99 percent of atmospheric pollutants.
It is a powerful air purifier with a built-in timer. You can adjust the power and speed of this air purifier, and it has three timer settings: one hour, two hours, and four hours.
The POWERTEC AF4000 is a remotely operated air filtration system that is lightweight and simple to install. It has a simple design and hooks for quick setup on any ceiling.
I plugged it in and pressed the button, and it started up. The sound level is loud enough to identify that it’s operating, with low, medium, and high speeds producing distinct noises. However, the noise on high isn’t loud enough to be a nuisance, so I can’t see myself running it at any other speed.
It was simple to install, and I simply used the supplied chains to hang it from the floor joists. It took around 10 minutes to complete.
Depending on how much I use it, I have to blow out the outer filter every two weeks. However, it does fill up rather quickly. It’s a testament to how well this works. So far, I’ve only had to clean the inner filter once, but that was long enough for me.
The outer filter, on the other hand, absorbs around 99% of the debris. It’s also simple to see the outer filter and know when it needs to be cleaned.
PROs & CONs
- Time-saving and energy-saving
- The filter system is simple to clean.
- Lightweight and straightforward to set up.
- Concerns about quality assurance
5. Shop Fox W1830 3-Speed Hanging Air Filteration System
The Shop Fox W1830 is an excellent solution for small to medium-sized spaces. It is designed with a 1/8 horsepower motor that provides enough power to keep the unit running.
It is designed with a 120V to single-phase motor that provides enough power to run continuously without stopping. The unit also has three different speed settings, 260 CFM, 362 CFM, and 409 CFM.
This Air Filter is a high-quality air filter. It comes with three-speed settings: 1200, 1400, and 1750 RPM for all your needs. This air filter is perfect for small to medium-sized rooms, and it can be used in both residential and commercial settings.
This Shop Fox W1830 is designed to fit any space, and it will work with any standard 20-inch ceiling height. It comes 20 inches wide and 17 inches deep and has a height of 10 inches. It is made of steel and aluminum.
This is an excellent option for people looking to filter the air in their house. There are three timer settings: one, two, and four hours. It also features an adjustable 72-inch power cord.
The Shop Fox W1830 is a tool-free filter that is simple to change. Using this product, you may get rid of dust, filth, and allergies in your house. It’s also lightweight so that a bulky device won’t drag you down.
Users are complaining about its noise, that it is too loud, but I didn’t find it loud, it is bearable and will not disturb anyone, the remote must be close to, and facing, the control panel to operate the device.
This unit isn’t meant to be your shop’s only dust filtering solution. It’s a secondary system for collecting dust.
The high fan speed option gives me 12.5 air changes per hour, resulting in a noticeable difference in the quality of the air.
After a session in the shop, I did notice some dust on equipment surfaces, but this is to be expected because this sort of system does not directly connect to dust-producing equipment but instead catches sawdust that has become airborne.
PROs & CONs
- Installation on a workbench or ceiling is simple
- Filters are washable
- Control panel that is simple to understand
- Built to last
- The remote control is flimsy
Woodshop Air Filtration System Buying Guide
Woodworking is a great way to pass the time, but it can also be dangerous if you’re not careful. One of the most important safety precautions is ensuring that you have a good air filtration system in your woodshop.
We’ll share some of the factors you should consider when buying a woodshop air filtration system.
One of the most important factors to keep in mind is the size of your shop. If you have a large woodshop, then you’re going to need a more powerful air filtration system than if you were working out of an apartment.
Also, think about how much material you plan on processing. Some types of woodworking require lots of sawdust, which means that your air filtration needs will be higher with this type of work.
When shopping for a good air filtration system, there are a few different types to choose from. The first type is called a filtered hood.
This type is typically mounted over your main workbench and can provide filtering for all areas around it. Of course, this type of system is only good if you do all of your work in one spot.
Another type of air filtration system is called a central dust collection unit. This type connects to the various tools throughout your shop and filters the air as it exits each machine.
These systems are strong enough to filter all of the sawdust created by a high-powered router, for example.
It’s also important to consider how easy it will be for you to maintain your air filtration system regularly. If you have a large workshop, then you won’t want any part of your filtration process to be too difficult or time-consuming.
Some types make changing their filters very easy and quick, which can save you time and hassle.
At the end of the day, choosing a good air filtration system for your woodshop is all about finding one that fits your budget and fits your needs.
Some types work better with certain types of woodworking than others, so keep this in mind when making your purchase.
With any luck, these tips will help you choose the right air filtration system for your needs!
How to Maintain an Air Filtration System
Maintaining your woodshop air filtration system is important to the health of both you and your equipment.
The most common type of air filtration system for a woodshop is a dust collector. A dust collector works by drawing in dirty air from the work area, passing it through a filter, and releasing clean air back into the room.
There are several things you can do to keep your dust collector running well and protect your lungs from harmful sawdust particles.
One of the most important things you can do is to empty the collector regularly. Depending on the size of your shop and the amount of woodworking you do, you may need to empty it as often as once a week or every few months.
Another important thing to do is to clean the filter regularly. The frequency with which you need to clean the filter will depend on the type of filter you have and how much sawdust is being generated in your shop.
You should also check the hoses leading to and from the dust collector for any blockages. If sawdust has built up in a hose, it can restrict airflow and cause the system to work less effectively.
Finally, make sure that the fan and motor of the dust collector are in good working order. If you notice any signs of wear or damage, contact a professional for repair or replacement as soon as possible.
Maintaining your woodshop air filtration system is an important part of ensuring clean, healthy air in your workshop.
By regularly emptying your dust collector, cleaning the filter, and checking for blockages in the hoses, you can help keep your system running well and protect yourself from harmful sawdust particles.
So if you’re serious about making quality projects in your woodshop, be sure to take good care of your air filtration system!
DIY Woodshop Air Filtration System
A well-ventilated woodshop is important to protect your health and the quality of your work. In this post, we’ll show you how to make a DIY woodshop air filtration system that will keep your shop clean and healthy.
Air quality is important in any workspace, but it’s particularly important in a woodshop. Wood dust can be dangerous to your health, and it can also cause problems with the quality of your work.
Dust can get into your eyes and respiratory system, causing irritation and even disease. It can also get on your tools and materials, making them difficult to use.
A good air filtration system will remove wood dust from the air, keeping both you and your shop safe and healthy. In this post, we’ll show you how to make a DIY woodshop air filtration system that will do the job well.
Step 1: Choose the Right Fan
To build an effective air filtration system, you’ll need a powerful fan to move a large volume of clean air through your shop.
A typical box fan isn’t powerful enough and won’t do the job well. Instead, choose a floor fan or an industrial-grade squirrel cage type that operates at high speeds.
These types are usually advertised as “air mover” fans. Look for one that moves 735-1,000 CFM (cubic feet per minute) or has double this amount within its diameter if you can find them.
Then follow these steps to install it in your woodshop.
Step 2: Locate the Fan
Position the fan so that it will draw air from outside the woodshop and blow it into the shop. If possible, place it near a window or door to make this easier. You may need to experiment with different locations to find the spot that works best for your shop.
Step 3: Hang the Fan
Hang the fan from a beam or other support using chains or rope. This will allow you to adjust the height of the fan as needed. Be sure to use heavy-duty hardware that can support the weight of the fan and withstand vibration.
Step 4: Connect ductwork
Use flexible metal ducting to connect the fan to an opening in an exterior wall. The ducting should be at least 4” in diameter to ensure adequate airflow.
If you need to connect multiple sections of ducting, use tape or hose clamps to secure the joints.
Step 5: Install Filters
To trap wood dust, install two filters in the ductwork – one near the fan and one near the opening in the wall. The most effective filters are pleated paper types with a MERV (Minimum Efficiency Reporting Value) rating of 8 or higher.
These filters are available at most home improvement stores. Be sure to check the manufacturer’s recommendations for replacement intervals.
Step 6: Test the System
Once everything is installed, turn on the fan and observe the system for a few minutes. Make sure that the fan is blowing air into the shop and that the filters are trapping dust. If everything looks good, you’re ready to start using your new air filtration system!
With a little effort, you can build an effective DIY woodshop air filtration system that will keep your shop clean and healthy. By following these steps, you can create a safe and comfortable workspace where you can enjoy working with wood.
The best woodshop air filtration system is one that can effectively remove sawdust and other pollutants from the air. There are several factors you should consider when choosing a woodshop air filtration system, including the size of your shop, the type of machinery you use, and the level of pollution.
In this article, we’ve looked at the five best woodshop air filtration systems and provided tips on how to choose the right one for your shop. We hope you find this information helpful as you search for the best woodshop air filtration system for your needs.
If you have any questions or want to share something regarding our best air filtration system for wood shops, you can reach out to us or leave them in the comments section.
FAQs (Frequently Asked Questions)
What filter do I need for woodworking?
You need a high-efficiency particulate air (HEPA) filter to protect you from the dust and particles created by woodworking. A HEPA filter will remove 99.97% of all particles larger than 0.3 microns from the air, so it’s the best option for protecting your lungs from sawdust and other debris.
Where do you put the air purifier in a woodshop?
Since the woodshop already has a lot of dust in the air, you will want to place the air purifier near the wall or door so that it can suck in all of the dirty air. You may also want to place it on a high shelf to keep it out of reach from small children or pets.
What is the difference between MERV 10 and MERV 13?
Merv 10 is an air filter standard that captures particles down to 3 microns in size. Merv 13 is an air filter standard that captures particles down to 1 micron in size.
What is the difference between CFM and RPM?
CFM is Cubic Feet per Minute, and RPM is Revolution per Minute. CFM measures how much air the fan moves, and RPM measures how fast the fan moves that air.